8 - MAINTENANCE COMPUTER PROGRAMMING
(only for TECNO Activa Central suction unit)
8.1 General information
Your TECNO Activa motor is programmed in order to warn you for its scheduled cleaning
and or a misfunction of its motor.
If necessary, the parameters stored in the computer can be modified to suit specific
needs.
Warning
Any modification of the parameters can only aim at optimizing standard pre-set values.
For example, if 4 hours (standard value) is the warning signal stored, it could be
brought to 2 hours but not to 6 hours.
During the programming operations, follow the instruction detailed on the table to
set new parameters:
Attention
Modifying the values above is a very simple procedure, but it requires a minimum of
attention and all sequences should be followed meticulously in order to be effective.
If you need additional information or have any doubt before the execution of the
modification procedure, please contact your service provider.
24
TA-TE 02/04-01
Installation, use and maintenance guide
2
4
6
8
10
12
14
16
18
3
6
9
12
15
18
21
24
27
50 100 150 200 250 300 350 400 450
Value on the display
Equivalent value on operating hours
before trigger alarm
FILTER CARTRIDGE CLEANING
Equivalent value on operating hours
before trigger alarm
DUST CONTAINER UNLOADING
Equivalent value on operating hours
before trigger alarm
MOTOR SERVICING
1
2
3
4
5
6
7
8
9
New optimizing values accepted
Standard parameter values
Non-optimizing values that cannot be used
