14
TA-TE 02/04-01
4
3
2
1
Assemble the panel on the opposite side.
Loosen the screws and remove
the rear fixing plate.
Remove the plate, loosen the screws assembled
below and remove the front panel.
Loosen the screws and
remove the top cover.
4.2 Switch from DX (right) to SX (left) model
The suction units included in the TECNO line are usually delivered suction and
exhaust pipes connections assembled on the right side of the unit (DX model);
when necessary, it is possible to switch the suction unit from DX (right) to SX (left)
model by assembling the inlets of the pipes on the left side (SX model).
Follow the instructions detailed below to switch from DX (right) to SX (left) model:
Installation, use and maintenance guide
