Instruction manual T-Smart
10
27/05/14 Rev:1.0.0
CENTRAL VACUUM SYSTEMS
ByTecnoplus
s.r.l.
WARNING:
TECNOPLUS S.R.L. declines any form of responsibility or guarantee if the purchaser,
or anyone in his stead, makes even the slightest modi
fi
cation or adjustment to the purchased product.
The unit has been designed to satisfy at best the present needs of the domestic central vacuum cleaners
market, both in terms of quality and operating capacity.
All materials and components used to manufacture this product comply with CE safety regulations. All
relevant certi
fi
cations are held at the of
fi
ces of TECNOPLUS S.R.L.
5.1 IP Protection Degree
The appliance features a protection against solid objects having a size exceeding 12 mm. The
appliance is not protected against water penetration.
5.2 Electrical insulation degree
CLASS I: the appliance features basic electric insulation.
It must be connected to the grounding circuit through the main electric wiring.
5.3 Declaration of absence of dangerous substances
TECNOPLUS S.r.l. declares that its products and appliances have been manufactured with materials
which comply with the restrictions established by the health and environment protection regulations in
force and do not contain SVHC-classi
fi
ed substances (Substance of Very High Concern) in compliance
with CE regulation 1907/2006 (REACH: i.e. Registration, Evaluation, Authorization and Restriction of
Chemical Substances). Although these substances have not been used during the processing cycles of
raw materials and during the manufacturing cycles of our products, their presence in p.p.m. (parts per
million) cannot be completely excluded due to micro-pollution of raw materials.
5.4 Fixed closure guards safety
The vacuum cleaner is delivered to the Customer with its main body completely assembled. Moving
parts are protected by a protection grid. This protection grid cannot be accessed by the operator. The
operator also does not have access to the electrically-operated parts of the appliance which are pro-
tected by a cover which can only be removed by unscrewing the Torsen screws used to
fi
x the sound-
proo
fi
ng dome of the housing where the suction motors are assembled.
Every intervention on the control board and on the motors must be carried out by quali
fi
ed personnel
only after disconnecting the electrical power supply and by removing the electric plug from the electric
socket.
IP20
