Instruction manual T-Smart
12
27/05/14 Rev:1.0.0
CENTRAL VACUUM SYSTEMS
ByTecnoplus
s.r.l.
6 - AUTHORIZED USE OF THE VACUUM CLEANER
The T-Smart vacuum cleaner has been designed exclusively to vacuum clean dust, very small-size sol-
ids and dry materials. The use of the central vacuum cleaner is authorized for household and civil uses,
connected to a PVC wall-traced piping network and to a standard home electrical wiring.
The vacuum cleaner can be installed in domestic dwellings with the following characteristics:
• Medium to large cleaning areas (depending on the model)
• Piping network featuring 50-mm diameter pipe
• 220/240 V ac power supply
• Air exhaust conveyed to the outside
• Suitable for a single-operator use
• Suitable for installation in domestic spaces such as store rooms, boiler rooms, garages and balconies
(protected from the elements).
7 - UNAUTHORIZED USE OF THE VACUUM CLEANER
It is extremely important NOT to use the system in the following circumstances which are
considered to be inappropriate and dangerous:
• The system must not be used to vacuum clean fabrics, heavy or hot/burning materials.
• The system must not be used to vacuum clean liquids.
• The system must not be used to vacuum powder like cement, lime, plaster.
The system has not been designed to be used in environments with risk of explosion, and
therefore:
• it is forbidden to vacuum clean materials with high exploshion risk (gunpowder) or materials which are
individually inert but that, once collected and mixed in the dust bin, could provoke dangerous chemical
reactions.
• It is absolutely forbidden to use the vacuum cleaner in explosive atmosphere or outside the standard
temperature, pressure and humidity levels.
Any use of the appliance other than those speci
fi
ed above is forbidden.
Any change or modi
fi
cation made to the system in order to vacuum clean a particular type of
material must obtain the prior written approval of the manufacturer.
The use of the system for purposes other than those for which it was manufactured, represents
an irregular condition which can cause damage to the product and seriously compromise the
operator’s safety.