Instruction manual T-Smart
18
27/05/14 Rev:1.0.0
CENTRAL VACUUM SYSTEMS
ByTecnoplus
s.r.l.
9.6 Connection to the piping network
1. Using the sleeve, connect the dust inlet coupling of the vacuum cleaner, identi
fi
ed with (A) in the
picture, to the suction pipe from the piping network.
2. Using the sleeve, connect the venting air coupling of the vacuum cleaner, identi
fi
ed with (B),
to the air exhaust pipe of the house.
3. Glue the silencer (C) on the exhaust pipe near the exhaust air grid.
N.B.: do not glue the pipe end of the piping network to the dust inlet coupling or to the air exhaust cou-
pling:
10 STARTING THE VACUUM CLEANER
10.1 Control board
Vacuum cleaning inlets are distributed in the various rooms and connected through the pipe network.
For this reason, the operator is never directly in contact with the appliance while the system is working,
apart from starting operations and use of the vacuum cleaner (see paragraph 11).
C
A
B
