Flight Simulators Solutions
SC
1.7
SC-MB Ethernet Configuration
User Manual
SC-MAN-SCE-E-17-0003
21 / 23
User Manual - SC-MB Configuration - Rev1.7.docx
Screen 4: Daughters Boards
By double clicking on the
Daughter Boards the user will be
able to observe:
The INPUTS state (ON=green /
OFF=grey) for the Input Daughter
Boards.
Activate or deactivate OUTPUTS
in the Output Daughters Boards.
Test the displays in the Displays
Daughters Boards.
Check the analogical inputs or
pots in the ADC Daughters
Boards.
And verify the servos in the
Servos Daughter Boards marking
the icon "ACTIVATE Servo n" (n =
id of the servo). Another icon
called "ACTIVATE ALL SERV" is
used to activate the 16 servos of
the Board.
9
FAQS
# Next Steps?
The next step would be to search for the manual for your chosen add-on software. There you will find
information about any other configuration which may be necessary for set-up, such as the configuration of
Servos (different procedure with every Add-on), installing scripts etc.
If you have purchased a Plug and Fly Module, please read the User Manual for this module, there is further
information there concerning the installation and first configuration.
#Common Cathode or Common Anode?
All of the modules produced by Sismo are in Common Cathode.
#Is this SC-MB compatible with FSX/Prepar3D/X-Plane
