16
|
P a g e
Archimede Portable Dataloggers User Manual
rev.5 -03.12.2019-
To switch the DL on, press the
ON/OFF
and
INFO
key pressed simultaneously, maintaining them
pressed for some second.
After a few seconds (about 5 sec.), the DL will switch on and the display will show the home page.
This page will display the type of DL and the version of the firmware. At the bottom of the display
the name of the DL will be shown up: this is a name assigned to the user, which could be used to
distinguish between different DLs.
It is important to maintain separated the names of the different DLs when
importing data to a PC, in order to be able to trace the source of data.
At the upper right corner the display shows the current status of the battery: the remaining charge
is shown by the number of bars.
Battery Status
DL type
Firmware
version
Unit Name
USER INTERFACE
