Sirona inFire HTC, Руководство по эксплуатации

Страница: 8 / 30

61 30 459 D 3497
8 D 3497
.
201.01.04
.
02 06.2009
3 Safety information Sirona Dental Systems GmbH
Operating Instructions inFire HTC
Note on electromagnetic effects
Note on the prevention, recognition and
elimination of unintended electromagnetic
effects
This device is a piece of electrical equipment with a supply voltage below
1000 VAC and is intended for commercial use. It is to be installed in dental
laboratories or other areas with a controlled electromagnetic environment.
The applicable EMC requirements comply with EN 61326: 1997 + A1: 1998 +
A2: 2001.
CAUTION
Damage resulting from unauthorized alterations
The inFire HTC high-temperature furnace may only be altered with our
express prior approval. We are not liable for unauthorized alterations of
any kind.
➢ Switch the unit off and disconnect the power plug prior to performing
maintenance tasks.
DANGER
Separate circuit
The inFire HTC high-temperature furnace must always be connected to a
separate circuit with at least a 15 A fuse. The fuses must be of the slow
blow type.
DANGER
Risk of burns due to hot surfaces
The inFire HTC high-temperature furnace may develop hot surfaces in
some areas after extended use. Use the necessary caution around the
unit, especially when the furnace is operated for extended periods.
➢ Never touch the hot surfaces.
DANGER
Risk of burns due to hot surfaces
Once the program has ended and the furnace has shut down, the cooling
fan will run until the interior temperature of the furnace has been reduced
to normal. The power plug may not be disconnected prior to this point.