Sirona inFire HTC, Руководство по эксплуатации

Страница: 15 / 30

61 30 459 D 3497
D 3497
.
201.01.04
.
02 06.2009 15
Sirona Dental Systems GmbH
6
Operation
Operating Instructions inFire HTC Switching on the unit
båÖäáëÜ
Right side
Description of the columns on the left side with the freely
programmed furnace programs (11 to 30)
The laboratory furnace heats up and cools down in up to four temperature
steps. It is possible to heat or cool down within the program run.
6.2 Switching on the unit
Switch-on ✔ The unit has been properly set up and connected to a power outlet.
➢ Turn on the main switch.
ª
The main switch is illuminated and the LCD screen shows a status display
for 3 seconds before the standby display is shown.
Status display
Setup
Line Description
S4 Status of furnace (e.g.
READY
) incl. number of furnace program
entered (e.g.
11
).
S3 Current temperature of furnace chamber.
S2 Current Day of week and time.
S1 Day of week and estimated time for end of program
Column Designation Description
Heating and cooling down
speed
The heating and cooling down speed of the corresponding level is set
up/displayed in this column. The heating and cooling down speed can
range from 1 °C/min to 30 °C/min.
Holding temperature The the corresponding step is set/displayed in this column.
Holding time The holding time of the corresponding step is set/displayed in this
column.
/min
min
/min min
S4
S3
S2
S1
Line 1 (S4) Model number
Line 2 (S3) Order number (REF:)
Line 3 (S2) Serial number of electronics (Serial No.:)
Line 4 (S1) Hardware version (HW:) and software version (SW:)