Sirocco Eco4 E4 HE Plus Скачать руководство пользователя страница 2

Страница: 2 / 36

These Notes Must Be Read Before Installation

This appliance is an Inset Live Fuel Effect appliance that provides radiant or

combined radiant and convected heat; it cannot and

should not

be used as the

main heating source within a property.

The appliance is designed to fit most types of fireplaces with a natural draught flue

as listed in the Installation Requirements.

The appliance must be installed by a competent person in accordance with the Gas

Safety (Installation and Use) Regulations 1998.

A Gas Safety Registered installer must be used for this purpose.

Read all these instructions before any installation takes place and in conjunction

with the appliance on site.

This appliance must be installed in accordance with the rules in force and only used

in a sufficiently ventilated space.

This appliance is factory set and tested for operation on the gas type, and at the

pressure stated on the appliance data plate.

After a new gas appliance (excluding flueless cookers) has been fitted, the Building
Regulations in England and Wales require that the installation must be notified to

your Local Authority. Your Gas safe registered engineer needs to do this, failure to

Содержание Eco4 E4 HE Plus





































Результаты поиска

Содержание Eco4 E4 HE Plus

Отзывы:

Похожие инструкции для Eco4 E4 HE Plus

Бренды по названию

Популярные бренды

Sirocco Eco4 E4 HE Plus, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Eco4 E4 HE Plus

Отзывы:

Похожие инструкции для Eco4 E4 HE Plus

Бренды по названию

Популярные бренды