Sirocco Eco4 E4 HE Plus, Инструкция по установке и эксплуатации

Страница: 20 / 36

20
SECTION 9: FITTING THE DECORATIVE FRAME
The appliance is supplied with a decorative frame, the frame attaches to the firebox as a three piece or one
piece clip-on unit.
Place the magnets supplied to the outer frame of the fire box.
A plastic protective coating may be applied to the face of the frame assembly, which should be removed at
this stage; the one piece unit can be placed in position.
With the three piece unit you should start with the side pieces of the clip-on assembly, these should be
pushed into position first, followed by the top bar, which should overlap the sides.
IMPORTANT NOTE: Due to the possibility of sharp edges, care should be taken when handling
the three piece frame components, the use of protective gloves is recommended.
Place the fire front/ fret into position in front of the fire and slide the ash pan door into place.
The fire front/fret shown in these instructions may differ from the one supplied with the appliance, we
strongly recommend you use a fire front/fret supplied by Sirocco fires as these products will have been
tested with the appliance, although other fire front/frets will be compatible.
Section 10: COMMISSIONING THE APPLIANCE
Turn on and test the gas supply up to the fire for any leaks, in accordance with current Approved Codes of
Practice (ACOPs).