Sirman LCJ10 SC, Инструкция по эксплуатации и техническому обслуживанию

Страница: 4 / 17

4
CHAP. 1 - MACHINE INFORMATION
1.1 - GENERAL PRECAUTIONS
• The machine must only be used by trained personnel who are perfectly aware of the safety norms
contained in this manual.
•
If there is a turnover of staff, promptly provide proper training for new personnel.
•
Even if safety devices are installed on the machine do not place hands near moving parts and avoid
touching the machine with wet or damp hands.
•
Before carrying out any type of maintenance or cleaning, disconnect the machine plug from the
electrical outlet.
•
The machine must only be used by trained personnel who are perfectly aware
of the safety norms
contained in this manual.
•
If there is a turnover of staff, promptly provide proper training for new personnel.
• Even if safety devices are installed on the machine do not place hands near moving parts and avoid
touching the machine with wet or damp hands.
•
Before carrying out any type of maintenance or cleaning, disconnect the machine plug from the
electrical outlet.
• When intervening for mainteannce or cleaning purposes (therefore the protections are removed)
carefully evaluate residual risks .
•
During maintenance or cleaning always concentrate on the operations in progress.
• Regularly check the state of the feeding cable (completely unwinding the cable, avoiding twisting it, is
advisable to avoid potential risks); a worn or broken cable can present serious danger of the electrical
kind; avoid compressing the wire with weights, leaving it in contact with hot or sharp surfaces and
pulling on it to unplug it from the outlet.
•
If the machine shows signs of malfunctioning or does not work, do not use it or try to repair it; contact
the “Assistance Center”, indicated on the back of this manual.
• The combination of the OUT and START pushbuttons must only be used for unloading the worked
product.
•
The machine must only be used for cleaning potatoes / mussels / onions.
• The manufacturer is not responsible in the following cases:

if the machine is mishandled or the safety devices are installed by unauthorized personnel;

if components are replaced with unoriginal parts;

if the instructions in this manual are not followed carefully;

if the machine surfaces are treated with inappropriate products ( inflammable, corrosive or harmful
substances).
1.2 - SAFETY DEVICES INSTALLED ON THE MACHINE
The safety devices against risks of electrical nature conform with the directives
2006/95/CEE,
1935/2004CEE, while the mechanical safety devices conform with the directives 2006/42 CEE.
The machine is equipped with:
• a starting device consisting of a control card insulated in IP 34, 24 Volts,
which enables:
turning the machine on and off;