Sirman LCJ10 SC, Инструкция по эксплуатации и техническому обслуживанию

Страница: 13 / 17

13
5.2 - LOADING AND WORKING
THE PRODUCT (see FIG. n°10)
NB: The goods to be worked are loaded gradually on the cap from the
upper cover when the motor is off. Adhere to the following procedure:
1 load the product from the upper cover, making sure
that the discharge door is closed well;
2 check that the machine is not too full and that the
level of the product does not go over the abrasive
band inside the machine;
3 close the upper cover;
4 open the water flow using the faucet on the hopper;
Running:
1 set the desired work time with the timer (max time 5 min.);
2 then start the machine by pressing the START ‘I’ pushbutton;
3 if the cover and/or discharge door are accidentally opened or moved while the
machine is running, the machine will stop; when closed press the START ‘I’ button;
4 open the water flow using the faucet on the hopper;
5 if the machine is outfitted with a stand with sieve, repeatedly unload the slag
tray, to avoid the water dripping.
Unloading the worked product:
1 close the water faucet and put a big container near the discharge outlet;
2 to unload the material open the discharge door, keeping it open with your right
hand; press the OUT and START ‘I’ pushbutton at the same time with your
left hand; the machine will start unloading the product by centrifugal force;
3 once the unloading is complete the machine will stop by releasing the pushbut-
tons and the discharge door;
N.B.: Avoid making an empty machine turn.
CHAP. 6 - ROUTINE CLEANING
Before starting this chapter it is important to point out that:
The line of professional PPJ/LCJ SC is outfitted with normative measures for the electrical and mechanical
protections both in the working phase and the cleaning and maintenance phases. All the same,
RESIDUAL RISKS exist which cannot be totally eliminated; they concern the danger of contusions
caused by inexpert contact with the external surfaces or abrasive internal ones of the machine.
ATTENTION!: never put hands inside the moving machine.
FIG. n°10 - Loading the product