Sirman LCJ10 SC, Инструкция по эксплуатации и техническому обслуживанию

Страница: 17 / 17

8
CHAP. 3 - RECEIVING THE MACHINE
3.1 - SHIPPING THE MACHINE (see FIG. n°3)
The machine leaves our warehouses correctly packaged, such a package consists
of:
a) an external box in robust cardboard and a wooden pallet;
b) the machine;
c) this manual;
d) the CE compliance certificate.
If requested/ordered:
e) stand with sieve.
FIG. n°3 - Package description
b)
e)
a)
c)
d)
9
3.2 - CHECKING THE PACKAGE UPON RECEIPT
When the package is received, if there is no external damage, open the package
and check that all the material is inside
(see FIG. n°3) .
If the package shows signs of mishandling, bumps or falls upon delivery, the
shipping company must be made aware of the damage within 3 days of the
delivery date indicated on the documents, and a detailed report must be written on
the damage to the machine.
Do not overturn the package!! When the package is
being moved make sure that it is firmly held in the four fundamental points
(keeping it parallel to the floor).
3.3 - DISPOSING OF THE PACKAGE
The package components (cardboard, pallets, plastic and polyurethan foam strap)
are produced like solid urban waste, therefore they can easily be disposed of.
If the machine is installed in countries with particular norms, dispose of the
packages according to the laws in force.
CHAP. 4 - INSTALLATION
4.1 - MACHINE PLACEMENT
When choosing the plane the machine will be placed on the dimensions shown in
Tab. 1 must be considered (based on the model), therefore the surfaces must be wide
enough to hold it, and it must be well-levelled and dry.
Prearrange a discharge tube (ø60 mm.) under the machine and a drain trap on the
floor, or a floor grate to collect the water or other waste material.
Furthermore the machine must be placed as near as possible to a faucet (ø12 mm.),
which enables the feeding tube to be easily and safely attached
(see FIG. n°4) .
Once the machine is placed proceed to blocking it by fastening it to the floor with
the setscrews on the flanged feet.
Furthermore the machine must be placed in an
environment with a maximum humidity of
75%, which is not salty and has a temperature
b5°C and +25°C; in any case in
environments which do not bring about its
malfunctioning.
Fig. n°4 - Discharge diagram
Discharge ø60
230 mm
120 mm
Load ø12
Discharge ø60