Analytics
Page 55
Resize an area
The three areas can be resized to adjust the alarm levels.
1
Click the area that you want to resize.
A dashed outline with a single (white) resizing handle appears.
2
To adjust the size, drag the resizing handle up/down.
The adjacent area will adapt accordingly, if necessary.
Zone activation time
With the green area (flare active zone) or the red area (flare too large zone) selected, set the zone
activation time. This is the time to elapse from the moment flames enter the green or red area,
before an event is triggered.
Activate alarms
With the detection areas properly configured, you can activate flare event alarms.
In the Settings section, click to select the
Enable
check box of Alarms.
11.5
License Plate Recognition
The License Plate Recognition page is where you can view the read license plates and configure the
settings for license plate recognition.
11.5.1
Reads
The Reads tab lists the license plates read (i.e. recognized) by the camera. The most recently read
license plate is added at the top of the list.
Use the single-arrow buttons at the bottom of the list to scroll one page forward or backward
through the pages. The double-arrow buttons allow you to scroll fast forward or backward (i.e. in
steps of ten pages) through the pages.
Of each license plate, the tab gives the following information:
The
Time
column indicates the time (yyyy-mm-dd hh-mm-ss-ms) when the license plate was
read.
The
Type
column indicates the type of recognition. LPR stands for License Plate Recognition.
The
Plate
column indicates the license plate number.
The
Country
column indicates the country code on the license plate. WORLD means that no
specific country codes are recognized by the camera.
The
Confidence
column indicates the level of accuracy (in percentages) of the read license
plate.
11.5.2
Camera #
The License Plate Recognition function enables the unit to read a license plate when a license plate
is detected in a specified area of the field of view - that is, the Region of Interest ROI.
The Camera # tab allows you to draw the Region of Interest and to configure the settings for license
plate recognition.
Draw a Region of Interest
Using the toolbar in the Settings section, you can draw the region of interest.
