Live Stream
Page 11
Use the wiper
Clicking Wiper on activates the wiper function on the unit. The wiper remains active until you
click Wiper off or until the time-out period (default: 5 s) expires.
Use the washer
Clicking Wash starts a washer sequence. The camera temporarily moves to the position required
for the washer function and then returns to its previous position.
Take a snapshot
It is possible to take a snapshot of the video in the preview.
Click
Take snapshot
.
The picture is saved in JPG format to the designated folder.
The file name includes the camera name and date/time information.
Record a live stream
A video stream shown in the preview can be recorded and downloaded to your PC.
1
Click
Start recording
.
The button flashes red to show you started a recording.
2
To stop the recording, click
Stop recording
.
The recording is saved in AVI format to the designated folder.
The file name includes date/time information.
Enter full-screen mode
For better observation, you may want to enter full-screen mode.
Click
Full-screen
.
The preview fills the entire screen.
Clicking Close full-screen
or
pressing [Esc] on your keyboard takes you back to standard
mode.
Video streaming
Video streaming can be started and paused with the
Play
and
Pause
buttons in the centre of the
preview. These buttons are available when the PTZ controls are hidden.
Play live video stream
Pause live video stream
Pan/Tilt the camera
A PTZ camera connected to the unit can be controlled from the Live Stream page.
1
Go to the PTZ page to make sure that PTZ control is enabled for the camera.
2
If the PTZ controls are hidden, click
Show PTZ controls
.
3
To pan/tilt the camera, drag your mouse pointer across the preview in the direction you
need.
Clicking in the preview also moves the camera.
Nice to know
In case of a power failure, the unit automatically resumes its prior position when it is powered on
again.
