SIQENS Ecoport 800
Operation
Page 26 of 49
5.
Operation
A charging cycle of the Ecoport follows the procedure described below:
1.
The system start is triggered by a preset battery voltage, the external input or manually
via the control panel.
2.
The device heats up until it reaches the operating temperature. This process takes about
30 min.
3.
The charging phase takes place with nearly constant power.
4.
When the preset charging end voltage is reached or as soon as the external signal is no
longer applied, the cooling phase begins and the Ecoport returns to stand-by.
Further information on the startup behavior can be obtained under
To ensure the correct connection of all components of your energy system, the initial start-up of
the Ecoport should be carried out right after installation.
For a video on the setup, installation, and initial operation, please visit the
following link:
