SIQENS Ecoport 800
Installation
Page 15 of 49
4.1.
Installing the mounting kit
Four mounting brackets are included in the scope of delivery. With these, the device can
optionally be fixed to a suitable base.
NOTICE
Do not tilt the unit when installing the mounting brackets.
1.
Remove flange head screws
Remove the 4 flange head screws (Torx 30) next
to the rubber feet
2.
Install mounting brackets
Screw the 4 mounting brackets to the housing by
using the 4 countersunk screws included in the
accessory.
Check the mounting brackets for firm hold.
