Sinterit ATEX Vacuum Cleaner USER MANUAL | 11
8. Fit the Antistatic hose ø 32 mm
10
with the Inlet Aluminium connector 50/32
11
to the Suction hose connector (in
the vacuum cleaner) (Image 6).
• At the same time, lift the locking screw of the suction hose connections (Image 7, part 1) and insert the Inlet
Aluminium connector
11
(Image 7, part 2).
2
10
1
2
Image 6. Connecting the Antistatic hose
to the vacuum cleaner 1.
Image 7. Connecting the Antistatic hose
to the vacuum cleaner 2.
9. Connect the Antistatic hose ø 40mm (from the vacuum
cleaner) to the Inlet tube
4
of the powder separator
(Image 8).
• If you have used a vacuum cleaner before,
remember to remove the Aluminium connector
50/40 from the Antistatic hose.
10. On the other side of the Antistatic hose ø 40mm,
mount a nozzle suitable for the type of work: Rubber
nozzle or PVC brush (Image 8).
4
OR
Image 8. Connecting the Antistatic hose ø 40 mm
and accessories to the powder separator.
The Sinterit Powder Separator is assembled, connected to the vacuum cleaner and ready to use. Enjoy!
