18 | Sinterit ATEX Vacuum Cleaner USER MANUAL
Image 17. Grounding wire in the Antistatic hose.
Image 18. Correct connection of Antistatic hose
and Aluminium connector (grounding is visible).
WIRE INSIDE
THE PIPE
Image 19. The metal tie provides the connection of the Antistatic hose to the Aluminium connector 32/50
and continuity of grounding in the powder separator.
10. General legal information
Where this manual refers to Sinterit or the Company, this means Sinterit sp. z o.o. with its legal seat in Krakow, registered
by the District Court for Kraków-Śródmieście in Krakow, XI Commercial Division of the National Court Register under
number: 535095, NIP (tax number): 6793106416, with the share capital for a date of publication of this manual of
PLN 102,050 (say: one hundred and two thousand and fifty).
This document contains material protected under copyright and industrial property laws. This means that the document
may not be, including but not limited to, reproduced or modified without the consent of Sinterit.
This manual serves to assist you in the correct use of the device, perform basic maintenance and, if necessary, to solve
simple problems, allowing you to maintain the device in a good condition.
This manual contains content exclusively for the provision of information and the use by individuals professionally
trained and engaged in the operation and maintenance of the equipment described below.
The information contained in this document is intended for use only with the product called Sinterit Powder Separator.
Due to the constant development of Sinterit’s products the information contained in this manual, specifications and
markings are subject to change without notice.
11. Disclaimer
Sinterit is not responsible for any use of this information in relation to other products.
Sinterit is not liable for any damages, including but not limited to losses or lost profits, resulting from the use of any
materials (consumables) other than those provided to the purchaser by Sinterit.
Sinterit is not liable to the purchaser of the product or any third party for any damages, including but not limited to
losses or lost profits resulting from improper use of the product, particularly not in accordance with this manual, or
modifications or repairs unauthorised by Sinterit or improper maintenance.
Although every effort has been taken to provide accurate information about the product, Sinterit assumes no responsibility
for any incorrect information or omission. Sinterit reserves the right to correct any errors and disclaims any liability in
situations resulting from these errors.
Further limitations or exclusions of Sinterit`s liability may result from the applicable laws or agreements entered into with
the purchaser of the products.
