background image

Sinterit ATEX Vacuum Cleaner USER MANUAL   |  7

ATTENTION! 

• 

Risk of crushing upper limbs while fitting and locking the Body 

1

 on the 

Metal container 

7

• 

Never place hands between the body and Metal container while locking. 

• 

Do not put hands near the Clamping ring 

6

 while locking.

• 

Perform the container locking operation by means of the lever located on 

the Clamping ring, USING BOTH HANDS!

ATTENTION! 

Make sure all the guards and protection devices are in place and that all the safety devices are 
in place and working properly. 

C. PERSONAL PROTECTION

ATTENTION! 

• 

The operator must always wear antistatic clothes and shoes.

• 

The floor of the area to working with powder must be antistatic.

STOP!

Do not wear loose or hanging clothing such as ties, scarves or torn garments that could become 
trapped and be sucked up by the part of separator kit.

D. SAFETY REQUIREMENTS DURING USING THE POWDER SEPARATOR

WARNING!

Always make sure the powder separator is free of all external materials such as debris, oil, 
equipment and other objects that could affect operation and cause injury to persons.

STOP!

• 

Climbing on the powder separator is forbidden.

• 

Do not open the powder separator Metal container with the machine running.

WARNING!

The opening of the powder collection container must be executed in a NOT-CLASSIFIED 
atmosphere (an area with a non potentially explosive atmosphere), after having disconnected 
the device and only after more than 1 minute from the switching off.

ATTENTION!

Connect the Grounding clamp 

9

 with a conductive surface connected with the 

earth.

Содержание Powder Separator





















Отзывы: