Sinterit ATEX Vacuum Cleaner USER MANUAL | 13
Image 10. Removing the powder from Lisa printer using Sinterit Cleaning System.
7. Information and tasks while powder suction
ATTENTION!
Avoid rolling or bending the flexible Antistatic hose when extracting powder from the printer.
ATTENTION!
Do not open the powder separator Clamping ring
6
while the vacuum cleaner is on. Disconnect
only when the vacuum cleaner is off!
1. When sucking the powder out of the printing chamber, hold the end of the hose/Rubber nozzle close to the surface.
2. Never clog the end of the Rubber nozzle or stick it completely in the powder! Air access must be provided (Image 11).
Image 11. Incorrect and correct removing the powder from the print chamber.
