11. General legal information
Where this manual refers to Sinterit or the Company, this means Sinterit sp. z o.o. with its legal seat in Krakow, registered by
the District Court for Kraków-Śródmieście in Krakow, XI Commercial Division of the National Court Register under number:
535095, NIP (tax number): 6793106416, with the share capital for a date of publication of this manual of PLN 102,050 (say:
one hundred and two thousand and fifty).
This document contains material protected under copyright and industrial property laws. This means that the document
may not be, including but not limited to, reproduced or modified without the consent of Sinterit.
This manual serves to assist in the correct use of the device, perform basic maintenance, and, if necessary, to solve simple
problems, allowing to maintain the device in a good condition.
This manual contains content exclusively for the provision of information and the use by individuals professionally trained
and engaged in the operation and maintenance of the equipment described below.
The information contained in this document is intended for use only with the product made by Sinterit and called Sinterit
Powder Handling Station (PHS).
Due to the constant development of Sinterit’s products the information contained in this manual, specifications, and
markings are subject to change without notice.
12. Disclaimer
Sinterit is not responsible for any use of this information in relation to other products.
Although every effort has been taken to provide accurate information about the product, Sinterit assumes no responsibility
for any incorrect information or omission. Sinterit reserves the right to correct any errors and disclaims any liability in
situations resulting from these errors.
Further limitations or exclusions of Sinterit`s liability may result from the applicable laws or agreements entered into with
the buyer of the products.
13. Trademarks
Sinterit logo is a registered trademark of the Company.
14. Terms of warranty
The terms of the warranty are set forth in the agreement between the buyer and the Company.
In case of a purchase made in the Sinterit online shop, the terms of the guarantee are specified in the Terms and Conditions,
subject to the acceptance of the Customer before placing an order.
In case of purchases made outside the Sinterit online store, the warranty terms may be specified in the offer, or in another
form chosen by the Company to provide the customer with relevant information before making a purchase decision.
Unless otherwise stated in the documents referred above or specifically agreed, the Sinterit’s warranty does not cover,
including but not limited to:
•
damages, abnormalities or malfunction caused by a client or any third party;
•
damages, abnormalities or malfunction caused by inappropriate use, effects of force, insufficient or inappropriate
maintenance, abnormal operating conditions, incorrect installation or inadequate servicing;
•
damages, abnormalities or malfunction caused by dismantling, alterations, tuning or other changes of the product by
a client or any third party made without the written consent of Sinterit;
•
damages, abnormalities or malfunction caused by or related to use of consumables other than those being supplied
by Sinterit;
•
damages, abnormalities or malfunction caused by or related to use of product against its intended use, instructions/
manuals or safety regulations;
•
damages, abnormalities or malfunctions Sinterit is not liable for, according to the applicable law,
•
damages exceeding the price paid by the client;
•
costs incurred by the client in connection with the conclusion of the product sale agreement as well as storage or
insurance of products;
•
damages of property caused by the defect of the product;
•
loss of profits;
•
incidental, indirect, special, consequential or punitive damages.
The warranty does not cover any cleaning of working parts.
POWDER HANDLING STATION Manual | 36
