D. REPLACEMENT OF THE FUSE
For these activities you will need:
Allen key 5 mm
G
(from the box with additional accessories)
1. Operate only when the power is off! Also, switch on
the E-STOP button
19
on the Control Panel to cut off
power from the internal components of the machine.
2. Using an Allen key 5 mm, unscrew the left-back service
panel. Put the panel in a safe place (image 56).
Image 56. Unscrew the top two screws holding
the left-back service panel.
3. Find the Fuse socket (image 57).
4. Remove the Fuse housing together with the used Fuse (image 58).
5. Replace the used 6A Fuse with a new one (image 58).
6. Dispose of the used fuse by your local waste management policy.
41
NEW
FUSE 6A
Image 57. Location of the Fuse.
Image 58. Replacing the Fuse with a new one.
7. Reinstall the Fuse housing in the PHS.
8. Mount the left-back service panel and secure it with screws.
9. Reconnect the power supply to the PHS.
35 | POWDER HANDLING STATION Manual