WARNING!
In the following situations, unplug the product from the power supply and contact
with Sinterit Support:
•
the power cord or plug is damaged;
•
some liquid got into the product;
•
the product has been dropped or the case has been damaged;
•
the product does not operate properly or clear changes in efficiency have been
observed.
STOP!
•
Never touch electric wires, switches, buttons, etc. with wet hands.
•
Do not pour the liquid onto the product.
•
Do not place any containers on the device, in particular those containing water.
•
Do not touch live parts.
•
Never pull the machine using the power cable.
•
When connecting/disconnecting the plug to/from the power socket always
hold the cover, not the cable.
•
In the event of the cable being damaged, the machine must not be used.
•
Never disassemble, modify or repair the power cable, plug, devices inside the
printer, except as described in the product manual.
•
Do not place objects on the Power cable.
•
Do not place Power cable in a path where people will have to walk or run.
ATTENTION!
The PHS must be connected to a grounded outlet to prevent electric shock in the
event of a fault.
E.
SAFETY REQUIREMENTS DURING USING THE SINTERIT PHS
WARNING!
•
Before using PHS always make sure the printer is free of all external materials such as debris,
oil, equipment, and other objects that could affect the operation and cause injury to persons.
•
Before each use, check the device for damaged and/or defective parts.
•
In the case of a defect or malfunction of the device, have it repaired by a qualified person/
company first.
•
No smoldering or smoking substances (e.g. cigarettes, matches, or hot ashes) may be sucked
in.
•
Do not leave the device switched on unattended!
POWDER HANDLING STATION Manual | 8
