20
Function Parameters Table
The function parameters of the series AC drive have been divided into 14
groups (F00 ~ F0D) according to the function.
For the convenience of function codes setting, the function group number
corresponds to the first level menu,the function code corresponds to the level 2
menu and the function code corresponds to the level 3 menu.
1. Below is the instruction of the function lists:
The first line"Function code":codes of function parameter group and param-
eters;
The second line"Name":full name of function parameters;
The third line"Setting range":effective setting value of the function parameters;
The fourth line"Default value":the original factory values of the function
parameter;
The fifth line"Modify":the modifying character of function codes(the parameters
can be modified or not and the modifying conditions), below is the instruction:
“
○”：
means the set value of the parameter can be modified on stop and
running state;
“
◎”：
means the set value of the parameter can not be modified on the
running state;
“
●”：
means the value of the parameter is the real detection value which can
not be modified.
2. "Parameter radix" is decimal(DEC), if the parameter is expressed by hex,
then the parameter is separated from each other when editing. The setting
range of the certain bits are0-F(hex).
3. “Default” means the function code parameters will restore to the default value
during default parameters restoring. But the actually detected parameter value
or record value won’t be restored.
Chapter 4 Function Parameters Table
