19
Fig.3-
2 Operation Procedure of three-level Menu
Return
Return
Return
PRG
50.00
F00
F00.03
F00.04
50.00
ENTER
ENTER
PRG
PRG
ENTER
(Modify storage)
PRG
Parameter display
interface
level 1 menu
level 2 menu
level 3 menu
Press
Modify the parameters
You can return to Level II menu from Level III menu by pressing PRG or
ENTER.
Here is an example of changing the value of F03.03 to 15.00 Hz:
After you press ENTER , the system saves the parameter setting first,
and then goes back to Level II menu and shifts to the next function code.After
you press PRG , the system does not save the parameter setting, but directly
returns to Level II menu and remains at the current function code.
Remarks:
Fig
.
3
-
3Example of changing the parameter value
PRG
F03
.
00
PRG
ENTER
50.00
F00
F03
F03
.
03
10.00
F03
F03.04
15.00
10.00
ENTER
ENTER
PRG
In Level III menu, if the parameter has no blinking digit, it means that the
parameter cannotbe modified. This may be because:
1. Such a function code is only readable, such as, AC drive model, actually
detected parameter and running record parameter.
2. Such a function code cannot be modified in the running state and can only
be changed at stop.
Operation And Display
