GTJZ0612E&0812E&1012E&1212E Maintenance Manual
5-3
© Jul.2020
Figure 5-4
4.
Remove the bolts retaining the guide sleeve of the
cylinder piston rod.
5.
Remove the clevis pins.
NOTICE
Use caution when removing the cylinder. Do not
allow the cylinder to drop and become damaged.
6.
Remove the nuts connecting the base of the oil
cylinder and the scissor arm.
7.
Remove the bolts.
FLYING OBJECT HAZARD
Wear eye protection when striking
the brass bar with a mallet.
8.
Carefully drive out the clevis pin with a brass bar
and mallet.
9.
Carefully pull out the oil cylinder.
CHASSIS COMPONENTS
Removing the Drive Deceleration Motor
The drive deceleration motor plays the role of driving
and fixing the front wheel. Be sure to support the front
wheels when removing or installing the deceleration
motor. Use a properly rated lifting jack to lift the
machine and properly rated jack stands to support the
machine while lifted.
NOTICE
Be sure to disconnect the battery charger and main
power from the machine before removing the drive
motor.
1.
Remove the electrical components on the motor.
2.
Remove the tire bolts and remove the front wheel
mounted on the deceleration motor.
3.
Remove the bolts connecting the motor and the
chassis.
4.
Remove the nuts.
5.
Remove the bolts fastening the drive motor.
6.
Remove the drive motor.
Removing the Front Wheel Bracket
NOTICE
When installing the removed hose and fitting, it must
be tightened according to the specified torque. See
Hydraulic Hose and Fitting Specifications, page
1-9
Be sure to use an adequate lifting device with enough
capacity to lift the chassis. Be sure to place the lifting
device at a proper location on the frame.
Figure 5-5
1.
Disconnect the electrical components and circuits
on the drive motor.
2.
Remove the nuts and gaskets connected with the
steering linkage of the front wheel.
3.
Remove the fixing bolts from the front wheel
bracket.
Содержание GTJZ0612E
