Sinoboom GTJZ0612E Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 94

background image

© Jul.2020

2-10

GTJZ0612E&0812E&1012E&1212E Maintenance Manual

HYDRAULIC SYSTEMS
HAZARD

BURN AND HIGH PRESSURE
HAZARD

•

Hydraulic systems are hot. DO
NOT TOUCH! Serious personal
injury may result from hot
hydraulic fluid.

•

When work on the hydraulic
system is completed, thoroughly
clean any spilled oil from the
machine. Do not spill any
hydraulic fluid on the ground.
Clean any hydraulic fluid from
your skin as soon as soon as you
have completed performing
maintenance and repairs. Dispose
of used fluid as required by law.

•

Never inspect for hydraulic leaks
with bare hands or other exposed
body parts. As a minimum, wear
leather gloves and use cardboard
or wood to inspect for leaks. If
leaks are present, relieve pressure
to allow system to cool prior to
servicing. If injured by escaping
hydraulic fluid, contact a
physician immediately. Serious
complications may arise if not
treated immediately.

WELDING AND POLISHING
REQUIREMENTS

Before welding, grinding and polishing operations, al-
ways ensure you read and understand all operation and
maintenance requirements in this manual and the

Main-

tenance Manual

.

WELDING HAZARDS

•

Comply with the welder manufac-
turer’s recommendations for pro-
cedures concerning proper use of
the welder.

•

Welding leads or cables may only
be connected after turning off the
power unit.

•

Carry out welding operations only
after the welding cable has been
correctly connected.

•

Do not use the machine as a
ground wire during welding
operation.

•

At all times, make sure that the
power tools are completely stored
in the working platform. Do not
hang the power tools on the rail-
ing of the working platform or the
work area outside the working
platform, or hang the power tools
directly by the wire.

Before performing welding, grinding and polishing work,
welders must seek permission of the responsible de-
partment at the workplace.

AFTER USING THE
MACHINE

1.

Choose a safe parking location that is on sturdy,
level ground and that is free of obstructions. Avoid
areas with heavy traffic.

2.

Lower the platform.

3.

Turn the emergency stop switch of the ground con-
troller to the “OFF” position

4.

Turn the key switch to the “OFF” position and re-
move the key to avoid unauthorized use of the
machine.

5.

Block the wheels with the wheel wedges.

6.

Charge the battery.

NOTICE

After using the machine, the power off switch must
be disconnected.

«
...
34
35
36
37
38
...
»

Содержание GTJZ0612E































































































Отзывы:

Нет отзывов

Похожие инструкции для GTJZ0612E

Бренд: Dannmar Страницы: 40

Бренд: Genie Страницы: 77

Бренд: Hinowa Страницы: 175

Бренд: EASTMAN Страницы: 35

Бренд: HanseLifter Страницы: 290

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды