SINO SDS2MS, Руководство по эксплуатации

Страница: 47 / 75

E
.
The Function For 200 Point
39
entering the desired UCS.
When using key just key and under the prompt “ZERO No” enter the
number of the desired UCS. For the related operations, the operator may refer to
“5 Absolute/relative/user coordinate display mode” under “
Ⅰ
.Usage” of “A. Basic
Function”.
We take the working piece shown in Fig. (1) as example.
1) Enter the display mode of the first UCS.
Key
2) Enter the number.
Key
3) Move the machine tool to Point A.
X axis display 0,
Y axis display 15.
4) Process Hole A.
5) Enter the display mode of the second
UCS.
Key
6) Move the working of the machine tool
to Point B
X axis display -15,
Y axis display 0.
7) Process Hole B
8) Move the machine tool to Point C.
X axis display 0,
Y axis display 20.
9) Process Hole C
1
X
X
X
X