SINO SDS2MS, Руководство по эксплуатации

Страница: 14 / 75

A. Basic Function
6
between two points is to be found.
1) Move the tool along the direction of arrow and let it come to touch the one and
the other edges of the working piece, then determine the center position.
2) Key axis key
3) Key
4) Move the machine tool to bring the
axis displayed value into zero, and
the center position is reached.
7. "M/I" (The mm System/inch System) Conversion Display.
Key ,the size displayed in the
mm System/inch system will convert
one to the other.
1) The original display is in the mm
system, and the display in inch is
desired.
2) Key
3) Move the machine tabe to 2.4
4) Enter processing mode of Hole B
5) Key
8. Linear Error Compensation
The linear error compensation function is used to make the linear correction
of the system error of the grating metering system.
Correction factor S =(L-L')/(L/1000) mm/m
1
2
X
X
X
X
X
X
X
A B
2.4"
1"