SINO SDS2MS, Руководство по эксплуатации

Страница: 17 / 75

A. Basic Function
9
0
2
Move towards the positive direction of X axis of the
machine tool and search for the 1st absolute zero of the raster ruler as the
mechanical origin. After find the origin, then auto enter the next step for data input.
This time the X-axis displays the raster ruler fact value, and Y-axis displays the
former compensation value(if the readout is first compensated, the Y-axis display a
uncertain value).
6) Input the compensation setup of the 1
st
segment
At this time, firstly move the
X-axis raster ruler towards the
positive direction. When the raster ruler is moved around the length of the
compensation value
（
the compensation length in Step 4 is
±
0.5mm
）
, the
display of Y axis is dimmed and enters into the status of value setting status,
at this time input the standard value of Y axis or the exact value measured by
laser (this method is implemented in every set-up point)
Press
（
When press ,Y-axis will displays the X-axis’s value, and that means the
compensation value has been setup. If the value input is wrong, don’t move the
raster ruler, and press ,then press , this time the digit-display LED of
Y-axis will be in input state, and input the right value again.
）
Press , and enter into the next set-up point
Remarks: In this function, the display of X
axis is the coordinate value, while Y axis
displays the standard value or the
measurement value by laser
7) Input the compensation setup of the 2nd segment
Press
Press , enter into the next set-up point
8) Input the compensation setup of the 3rd segment
Press
Press , and enter into the next set-up point
0
2
3
0
1
coordinate value
The standard value or the
measurement value by laser