E
.
The Function For 200 Point
40
10) Enter the display mode of the third
UCS.
Key
11) Move the machine tool to point 3.
X axis display 0,
Y axis display 0.
12) Enter PCD function, process the six
small holes distribute uniformly on
the circle center at Point 3.
Key
13) The processing of the six small holes
has been finished, return to Point D,
the display should be:
For PCD function, please refer to the
related sections.
Ⅴ
. The Clearing of Subsidiary Zero Positions and Other
Related Problems.
1. The Clearing of Subsidiary zero positions
In absolute state (ALE state), key 10 times continuously, the memory
about all the subsidiary zero positions will be cleared, the 200 subsidiary zero
positions will become the same point of the zero position in the absolute state.
2. Reset during a subsidiary zero position is being used
A subsidiary zero position is being used of course under the display mode of
the corresponding UCS, resetting in this state is actually to reset a new subsidiary
zero position. The point at which the resetting operation act become the new
subsidiary zero position, and the new subsidiary zero position replacing the
X
X
X
X
Содержание SDS2MS
