SINO SDS 2-3VA, Руководство по эксплуатации

Страница: 44 / 53

39
6) Input the numbers of tool
Press
5) input the tool offset
X offset
：
press
Y offset
：
press
6) you can set others tools like this.
You can operate the tool storeroom as below after you input the datum of
tools, first install the second tool.
1) press key“F1”switch the set window.
2) Ensure the base tool.
Default the first tool as the base tool,
you can also set the other tool as the
base tool, key number is OK.
3) Call the second tool.
Move Cursor to “call tool”,
Press
4) open the tool
Move cursor to“tool state”
press“F3”or “F4”,can switch the tool state between on and off.
5)quit
，
press“F5” back to coor windows.
Move the flat-from to make the display value of X axis and Z/Z
0
axis
become zero.
The second tool has reached the datum mark, in like manner, the operator can
input and call 200 tools.
2
0
5
-
+
2