SINO SDS 2-3VA, Руководство по эксплуатации, Страница: 17 / 53

12
1) On the interface of system
parameter setting,
Press the or key until
the cursor moves to
to option field of ZERDIR on
axis X.
2) Press the “+” or “-” function key to switch ZERDIR to 1.
3) Press the “Save” function key to save the modification.
4) Press the “Exit” function key to quit the interface of system parameter
setting.
Note: The number setting direction of the ZER coordinate system
must be in accordance with the type of each axis. Therefore, you need to
only modify the parameter of one axis, and the parameters of other
axes change accordingly.
Note: If the modification of system parameter
setting is in confusion, you can use the “Factory
Value” (DEFT)function key to restore to factory
defaults.