SINO SDS 2-3VA, Руководство по эксплуатации, Страница: 30 / 53

25
LineLth
:
The length (the distance from the circle centers of the first
hole to that of the last hole)
Angle : The angle (the angle between the oblique line and the
positive direction of X axis)
Pots : The number of holes ( the number of holes shall be
larger than 1 )
After the parameters are input, the display automatically calculate the
positions of the holes along the oblique line. The operator press the or
key to select the hole number. And then the lathe tool moves to the
position the displayed values at X axis and Y axis are both 0.000, which is
the position of the hole.
Example: For the work piece as shown in the figure, the parameters are set
as follows:
Line distance (
LineLth
): 45mm
Line angle (
Angle
): 30
°
Hole number (
Pots
): 4
Operation steps:
1. In the status of normal display, metric system is selected (in the metric
system/British system option).
Move the machine tool, the peak of the lathe tool is aligned to the
circle center of the first hole. Zero clearing is carried out for X axis and Y
axis.
2. Press . The function of making holes along a line (at an equal
interval) is displayed.
If there is no need to change the parameters input previously,
Press the function key of “Proc”. The processing of holes along the
oblique line (at an equal interval) is directly started.