SINO SDS 2-3VA, Руководство по эксплуатации

Страница: 29 / 53

24
Chapter V Special Functions
Besides the functions of detection and positioning, at the display, the
following special processing functions are also provided: making holes
along a line (at an equal interval), making holes along a circle (at an equal
interval), inclined plane machining, and arc machining.
The functions make the existing equipment of the users be more
effectively utilized. Before using the special functions of the display,
acquaint yourself with the coordinates system first.
As shown in the figure, in the horizontal plane, the direction parallel
with the operator is X axis, and in the horizontal plane, the direction vertical
to the X axis is Y axis, and that vertical to the horizontal plane is Z axis. The
direction to which the arrow is pointed is the positive direction of the
coordinate. Users can also change the positive direction for counting in the
internal parameter setting according to their own use habits.
5.1 Holes along a line
Function introduction: At the display, the function of making holes along a
line at an equal interval is provided. It is used for making holes which are
equally distributed and whose circle centers are along the same straight line
in the XY plane. The operator only needs to input the following parameters:
XY plane
XZ plane YZ plane
Work-piece
Workbench