2.6. PREPARATION BY THE CUSTOMER
Unless otherwise agreed in the contract, the follow-
ing are normally the Customer's responsibility:
• Room preparations, including any building work
and/or ducting systems required;
• Electrical supply of the equipment, in compliance
with the standards in force in the country of use.
Particular care must be given to the protective
conductor commonly known as "earthing" and
to the efficiency of the circuit breaker installed to
protect the power outlet. It is the purchaser's re-
sponsibility to keep the above system adequately
efficient, in compliance with current accident pre-
vention regulations.
• Consumables or material normally subject to
wear;
• Equipment unloading at delivery and the conse-
quent liabilities.
2.3. DECLARATIONS OF CONFORMITY
The machine is constructed in compliance with the
relevant EU Directives, applicable at the time of its
entering onto the market.
2.4. SAFETY STANDARDS
The machine was built in accordance with the follow-
ing standards and directives:
Harmonised standards
IEC 60974-1 - IEC 60974-5 - IEC 60974-10
Directives
EN 60204-1 - 2014-35-EV - 9231 EEC - 9368 EEC
Standards
EN/IEC 61000-3-12 - EN/IEC 61000-3-11 - EN/IEC
61000-3-3
2.5. INFORMATION ON TECHNICAL
ASSISTANCE
The machines are covered by a warranty, as provided
for in the general conditions of sale.
If during the warranty period you experience a mal-
function or failure of the machine parts, which fall un-
der the cases covered by the warranty, the manufac-
turer, after the necessary machine checks, will repair
or replace defective parts.
The goods travel at the customer's risk; product dam-
age caused by transportation or unloading is not
covered by the warranty. All equipment and consum-
ables supplied with the product are also excluded
from the warranty.
It is reminded that any modifications carried out by
the user, without the express written consent of the
manufacturer, will void the warranty and free the
manufacturer from any liability for damage caused
by a defective product.
This applies in particular to alterations made to safety
devices that reduce their effectiveness.
The same considerations apply when using non-orig-
inal spare parts or those different to the ones explicit-
ly specified by the manufacturer.
For these reasons, we recommend our customers to
always contact our Customer Service.
7
1.995.229 EN - Rev. 1.1
NOVATIG 403 DC PULSE
