SincoSald NOVAMIG 320 LCD, Инструкция по эксплуатации

Страница: 20 / 36

workplace in full operating conditions, is less than 70
dB (A). These emissions comply with the limits of the
regulations in force and are not such as to generate
danger for operators.
Arc welding processes can, however, produce
noise levels above this limit. Therefore, users must
implement the precautions required by law.
5.7. TECHNICAL SPECIFICATIONS
The following table shows the main technical specifi-
cations relating to the machine:
Parametri NOVAMIX 320 LCD
Power supply, single phase 400 V - 50/60 Hz
Fuse 32 A
MAX absorption (MIG) 20 A
Noise emissions < 70 dB
MAX power (MIG) 15.5 KW
Duty cycle 100% (MIG) 199 A
Duty cycle 60% (MIG) 257 A
Duty cycle 40% (MIG) 315 A
Open circuit voltage (MIG) 55 V
Output range TIG 10 - 315 A
Output range MMA 10 - 315 A
Output range MIG 10 - 315 A
Efficiency (%) 84
Max energy consumption
value in the inactive state
(W)
48
Compliant with standards EN 60974 - 1 - 10
Application class S
Insulation class F
Protection class IP23
Cooling system AF
Operating temperature - 10 + 40 ° C
Wire
diameters
Steel 0.6 - 1.2 mm
STAINLESS
steel
0.8 - 1.2 mm
Aluminium 1 - 1.2 mm
Electrodes diameter 1,6 - 4 mm
Wire feed speed 2 - 20 mt./min
Wire spool capacity 16 Kg
Dimensions, mm (L x B x H) 625 x 250 x 540
Weight, kg 15.5
6. MACHINE USE
6.1. MACHINE LAYOUT DESCRIPTION
6.1.1. Front and rear panel layout of welding
machine
1. MIG torch euro connector.
2. Positive (+) welding power output connection
socket.
3. Negative (-) welding power output connection
socket.
4. TIG gun control connector.
5. TIG GAS Connector.
6. Input power cable.
7. Gas inlet connector.
8. Power switch.
6.2. EQUIPMENT CONNECTION
1.995.234 EN - Rev. 1.1
NOVAMIG 320 LCD
20