5. MACHINE DESCRIPTION
5.1. OPERATING PRINCIPLE
NOVAMIG series welding systems have been de-
signed for continuous wire welding under protection
of gas, in short and spray arc, with the use of solid and
animated steel, stainless steel and aluminium wires.
The NOVAMIG.series welding system composition is
shown below.
5.2. FEATURES
AND MAIN COMPONENTS
• 4.3 inches LCD screen
• Innovative welding mode selection, eye-catching
numerical display, extremely intuitive parameter
adjustment
• MIG/MAG Manual / SYN
• MMA function (Stick electrode)
• Hot start (improves electrode starting)
• Adjustable Arc Force
• TIG DC
• Lift Arc / HF ignition
• 2T / 4T mode
• Adjustable Down slope / Post flow
• Possibility to use 5 kg spools
• Waveform control, for added stability of the arc, even
at low currents
• Equipped with temperature, voltage and current
sensors for high protection
• Combinable to spool gun torch
5.3. ENVIRONMENTAL CONDITIONS
The machine does not require particular environmental
conditions. The machine must be installed indoors in
a well-lit, ventilated industrial building with solid and
level flooring.
The machine is suitable for operating in environments
that:
• have an altitude not exceeding 2000 m a.s.l.;
• temperature b 5 ° and + 35 ° C;
• relative humidity not higher than 80%.
It is forbidden to use the machine in environments
that are:
• dusty;
• in corrosive atmosphere;
• at fire risk;
• in an explosive atmosphere.
ATTENTION: The welding machine has an IP 23
protection grade, therefore its use is precluded
in certain environmental situations, such as rain,
excessive presence of metallic dust, presence of
acids and corrosive atmospheres.
5.4. LIGHTING
The lighting of the area of installation must comply
with the laws in force in the country where the
machine is installed and must, however, ensure good
visibility at all points, not create hazardous reflections
and allow clear reading of the control panels as well
as identification of emergency buttons.
As the machine does not have its own light, it
is necessary for the working environment to be
equipped with general lighting to guarantee the
machine has a value of 200 and 300 lux at all points
of the machine.
5.5. VIBRATIONS
Under operating conditions that comply with the
indications for proper use, the vibrations are not such
as to cause hazardous situations. If this happens, you
must request technical assistance and suspend the
use of the equipment until the fault is resolved.
5.6. NOISE
The equivalent continuous A-weighted sound
pressure level, emitted by the machine at the
1.995.234 EN - Rev. 1.1
NOVAMIG 320 LCD
19
