Sinclair SMH-100IRB, Руководство пользователя

Страница: 19 / 41

16
11 Air removal On/Off Off /
12 Floor debug On/Off Off /
13
Manual
defrost
On/Off Off /
14 Force mode Off/Force-cool/Force-heat Off "Force-cool" is unavailable to heating only units.
15 Tank heater Logic 1/Logic 2 Logic 1
1. This setting is allowed when the water tank is
available and the unit is OFF.
2. Unavailable to mini chillers.
16 Gate-Ctrl. On/Off Off /
17
Current
Limit
On/Off Off It ranges from 0 to 50A and the default is 16A.
18 Address [1-125] [127-253] 1 /
19
Refri.
recovery
On/Off Off /
Commissioning Parameters Setting
No Full Name Display Name Range Default Remark
1 T-HP max T-HP max 40~55
℃
104~131°F 50
℃
/122°F
2 Cool run time Cool run time 1~10min
3min
[2-way valve Off]
5min
[2-way valve On]
3 Heat run time Heat run time 1~10min
3min
[2-way valve Off]
5min
[2-way valve On]
2.4.1 Ctrl. state
[Operation Instructions]
At the commissioning parameter setting page, by touching “
Ctrl. state ”, it can be set to “ T-water out ” or “ T-room ”
[Notes]
●When “ Remote sensor ” is set to “ With ”, this setting can be set to “ T-water out ” or “ T-room ”. When “ Remote
sensor ” is set to “ Without ”, this setting can only be set to “ T-water out ”.
● This setting will be memorized upon power failure.