5
AFTER OPERATION
Remove any debris from the screen on the underside
of the lid.
Note: The lid screen can be partially
removed for easier cleaning and should be cleaned
regularly.
The blower housing and tube should be removed for
cleaning.
Inspect the grass bags for wear or damage. Make
sure that there is a snug fit between mower deck,
blower housing, tubes, and grass catcher cover.
STORING THE GRASS CATCHER
Clean the grass catcher thoroughly using a mild
detergent (other products may damage the tube).
Remove any debris from the the screen on the
underside of the lid. The screen can be partially
removed for easier cleaning.
If paint has been scratched on metal parts, touch
up with paint, or apply a thin film of oil to prevent
corrosion.
Store in a dry area. Hang the catcher and catcher
bags to dry thoroughly before storing for a long period
of time. Always store away from moisture.
MOWING WITHOUT THE BLOWER
For operation without the blower, the deflector must
be properly installed in the down position.
To remove the blower, see
BLOWER & COLLECTOR
REMOVAL
.
General Operating Instructions
Not
for
Reproduction
