14
www.simplicitymfg.com
Installation
Install Deflector & Hose
1. Install the deflector (A, Figure 18) and hose
adapter (D) , with the tube pointing down, to the
back plate and secure with four 5/16-18 x 1” bolts
(E), 5/16” washers (C) and 5/16-18 nylon lock nuts
(B).
2. Install the hose (G) onto the blower and secure
with the removable clamp (with knob) (H). At
least two bands must cover the outlet of the
blower.
3. Cut the hose to fit properly between the blower
and collector. At least two bands must cover the
inlet of the adapter (D). Secure with the stationary
clamp (F)
4. Remove the valve stem covers on the rear drive
tires and increase the tire air pressure to 22 psi
(151kPa).
5. Reinstall the valve stem covers.
Figure 18. Install Deflector & Hose
E
A
D
C
A. Deflector
B. Nylon Lock Nut, 5/16-18
C. Washer, 5/16”
D. Hose Adapter
E. Bolt, 5/16-18 x 1
F. Upper Hose Clamp
G. Hose, 55” Long
H. Lower Hose Clamp
B
F
G
H
Not
for
Reproduction
