13
Installation
A
B
E
E
D
Figure 17. Install Back Plate
A. Back Plate
B. Mount Frame
C. 5/16-18 Nylon Lock Nuts
D. 5/16-18 x 3/4 Carriage Bolts
E. 5/16-18 x 1-1/4 Carriage Bolts
F. 5/16-18 x 1 Bolts
G. Latch Reinforcement Plate
H. Cover Latch
I. 5/16” Flat Washers
J. 5/16-18 Serrated Flange Nuts
K. Hitch Pin
L. Hair Pin Clip
K
L
H
J
F
G
I
C
Assemble Back Plate & Mount Frame
1. Attach the back plate (A, Figure 17) to the mount
frame (B) using carriage bolts, flat washers, and
nuts (C). Use two 5/16-18 x 3/4” carriage bolts
(D) in the top two holes, and two 5/16-18 x 1-1/4”
carriage bolts (E) in the bottom holes.
2. Install the cover latch (H) and reinforcement plate
(G). Secure with two 5/16-18 x 3/4” bolts (F), and
5/16-18 serrated flange nuts (J).
3. Mount the back plate to the support assembly and
secure with the long hitch pin (K) and hair pin clip
(L).
NOTE: It is recommended that the rear suspension
be adjusted stiffer due to the added weight of the
collection system (see Rear Suspension Adjustment
for procedure).
Not
for
Reproduction
