Simplex 4006-9101, Техническое руководство

Страница: 64 / 78

Chapter 6. Programming System Options
6-4
Saving Changes
When System Option programming is complete, press the
EXIT/CLEAR key until the following prompt is shown.
[Count] Discard Save
Use the right arrow key to move the cursor to one of the fol-
lowing options and press <ENTER>.
• Count - continues the edit session.
• Discard - exits the edit session without saving your
changes (keeps the job that was loaded before you
started editing).
• Save - saves your edit changes
Note: Both discard and save restart the panel.
CLA Adapter
1
Set to ON if a Class A adapter mod-
ule is installed for the standard Initi-
ating Device Circuits (IDCs 1
through 5). Set to OFF if the module
is not used.
CLA Adapter
2
Set to ON if a Class A adapter mod-
ule is installed for the optional Initiat-
ing Device Circuits (IDCs 6 through
10). Set to OFF if the module is not
used.
EXP Relay
Set to ON if an expansion relay
module is installed on the panel. Set
to OFF if the module is not used.
Option Settings
Technical Manuals Online! - http://www.tech-man.com