Simplex 4006-9101 Скачать руководство пользователя

Страница: 14 / 78

Chapter 1. Overview

1-2

Power supply

•

120 VAC, 60 Hz, 4A; 240V, 50 Hz, 3A

•

24 VDC (filtered) 3A alarm power

•

24 VDC, ½A auxiliary power

•

Battery charger up to 25 Ah batteries per UL864; tem-
perature compensated. Recharge 12.7Ah batteries per
ULC-S527.

Note:

The 4006 back box can accommodate up to

12.7 Ah batteries.

Environmental Specifications

The panel operates normally with ambient temperatures
from 32° F to 120° F (0° C to 49° C), inclusive.

The panel operates normally under non-condensing humid-
ity conditions up to 93% relative humidity at 90° F (32° C).

Option Modules

The following lists all of the option modules for the 4006.
Refer to the individual instructions that accompany each
module for more information. Refer to the label inside the
door of the 4006 for the placement of optional modules.

4006-9801 Expansion Power Supply (EPS)

When additional notification appliance circuits are required,
an expansion power supply may be added. The expansion
power supply provides two additional 2A NACs, and fil-
tered/regulated 24 VDC, 3A power. The expansion power
supply is mounted to the right of the MSB at the bottom of
the chassis. It connects to the MSB with a ribbon harness.

The 3A alarm power of the EPS may be split between the 2
NACs and the 1/2A Aux. 24V power tap. One EPS per sys-
tem is allowed.

4006-9802 Expansion IDC Module (XIM)

This module mounts to the right of the MSB. It includes five
Class B Initiating Device Circuits, and a mounting point for
the optional IDC Class A adapter module.

4006-9805 and 4006-9806 City Circuit Cards

The city circuit card connects to the MSB with a ribbon har-
ness to provide connections to either Remote Station
(reverse polarity), or Municipal Master (local energy)
receiving units (selectable). The card has two circuits - cir-
cuit 1 reports alarm or alarm/trouble events (Remote Station
only) and circuit 2 can be configured to report trouble events
or supervisory events. In the event of a CPU failure, a city
card configured for a trouble output sends a trouble to the

city circuit. The card is mounted to the right of the MSB at
the top of the chassis. The 4006-9805 and 4006-9806 city
cards are identical except that the 4006-9805 provides hard-
ware disconnect switches for each circuit. One City Circuit
Card per system is allowed.

4006-9803 Expansion Relay Module

The Expansion Relay Module (ERM) includes 10 relays.
The relays may be programmed for per-zone operation, one
relay per IDC, or as desired. For example, it is possible to
program any relay for general alarm, trouble or supervisory
conditions. Normally Open or Normally Closed contact
operation is selected by shunt jumper placement. Contacts
are rated for 2A, 30VDC, 0.35 power factor.

Annunciator Modules

The 4006 supports the following annunciator modules. A
total of four annunciators may be added to the system, one of
which can be located in the panel (the Local Zone LED
module).

•

Local Zone LED Module.

The local Zone LED

Modules provides 24 LEDs for visible zone alarm and
trouble indication. (The Local Zone LED module,
which mounts on the front of the panel, is standard for
ULC-S527 compliant systems.) There are 10 Red and
14 Yellow LEDs. This provides a red alarm and yellow
trouble LED for each of 10 initiating device circuits.
This module also provides 4 Yellow LEDs, one for each
of 4 NACs. The LEDs are programmable, and can be
used for other functions as appropriate per application.

•

4610-9111 Remote LED/Switch Annunciator.

This annunciator provides the following:

10 programmable red LEDs (default programming
tracks alarm state of IDC1-IDC10)

6 programmable yellow LEDs (no default opera-
tion)

Green “power on” LED

Yellow “Alarm Silenced” LED

Yellow “Trouble”

Yellow “Comm Loss” LED

Tone-Alert

Switches for ACK, Alarm Silence, System Reset,
and Lamp Test

Key switch to enable switch functions