manualshive.com logo in svg

SimonsVoss WaveNet, Руководство пользователя, Страница: 69 / 210

Поделиться
Скачать
SimonsVoss WaveNet Скачать руководство пользователя страница 69

Outputs

Inputs (digital)

Input (analogue)

Respond to identification me-
dia or acknowledge completed
reactions that were triggered
by the digital inputs. Switch
the outputs depending on de-
tected identification media
(see 

RouterNode: Digital out-

put [

}

 74]

).

Respond to changes in the
status of the digital inputs.
Trigger a reaction at the con-
nected locks (see 

RouterNode:

Digital input [

}

 77]

).

Respond to status changes at
the analog input. Trigger an
event in the LSM (see 

Router-

Node: Analogue input
[

}

 82]

).

The    Set output and I/O status option shows you the current status and
the result of the last responses (see 

IO Status and LockNode

responsiveness [

}

 179]

).

Single RouterNode

1. Right-click on the entry of the router node whose I/O configuration you

want to change.

9

The window "Administration" opens.

WaveNet

 (Manual)

5. WaveNet Manager

69 / 210

Содержание WaveNet



















































































































































































































Отзывы:

Нет отзывов