SimonsVoss SI AP Series, Руководство пользователя

Страница: 8 / 44

3 Product specific safety notices
WARNING
Failure of the escape door function
The use of unsuitable components or components that are not ready for
operation can impair the function of an escape door. If you use the anti-
panic cylinder in non-approved locks, the escape door function may be im-
paired and cannot be released again.
1. Make sure that all parts of the lock are ready for operation.
2. Make sure that the panic function of the mortise lock is ensured.
3. Please refer to the documentation of the lock manufacturer.
4. Only use the anti-panic cylinder within the specified temperatures.
5. Perform a function test after installation or battery change of the anti-
panic cylinder.
CAUTION
Use of the anti-panic version of the locking cylinder in non-approved
locks
If you use the anti-panic version of the locking cylinder in unauthorised
locks, the escape door function may be impaired and cannot be released
again.
1. Only use the anti-panic version of the locking cylinder in locks for which
the locking cylinder is expressly approved.
2. Please refer to the documentation of the respective lock manufacturer.
3. Contact SimonsVoss Technologies GmbH for further information on this
subject (see Help and other information [
}
43] ).
Hand injuries from carrier springing back
A spring-loaded carrier is used in the anti-panic construction of the closing cylinder. This carrier
can spring back when it is not installed, causing hand injuries.

Do not hold the anti-panic construction of the closing cylinders in the area of the carrier.
IMPORTANT
Damage caused by moisture in outdoor use
Moisture can damage the electronics.
1. If you want to use the locking cylinder for outdoor applications or in high humidity (bathrooms
or washrooms), use the WP version.
2. Carefully insert the locking cylinder to avoid damaging the O-rings.
SmartIntego Locking cylinder
(Manual)
3. Product specific safety notices
8 / 44