signal will then sound and the outer or inside thumb-turn will rotate freely
again. Ensure that the outside or inside locking cylinder thumb-turn rotates
freely again after the thumb-turn has been engaged ready for use.
NOTE
If the user has an ID medium which is not authorised for use at that particu-
lar moment due to the time zone plan, a single audible signal will sound.
The cylinder will not engage, so the outer or inside thumb-turn continues to
rotate freely and the user cannot open the door. You need to configure this
response separately in third-party systems.
4.5 Opening and locking from the inner side
With freely rotating locking cylinders (FD)
The outer and inside thumb-turn rotate freely when not activated in the
freely rotating SI-Locking Cylinder, Doors can also only be opened or locked
on the outside using an ID medium on the inside thumb-turn.
With non-freely rotating locking cylinders (CO)
SI-Locking Cylinders which are permanently engaged for use can be
operated from the inside without a ID medium. In this case, the door can be
opened and closed using the inside thumb-turn without an authorised ID
medium.
SmartIntego
Locking cylinder
(Manual)
4. General information on SmartIntego
13 / 44
