background image

37

Cleaning the Body

Before carrying out any cleaning operations,
set the machine to the “O” energy level,
(machine switched off and plug removed
from the mains).

CAUTION: Never use solvents, abrasives or
chlorine-based products.

Cleaning the work area: Remove the work-

op, lifting it up from the front and sliding it

out. Remove the water collection dish under-
neath and clean everything with hot water
and detergent. Cleaning the external surfa-
ces: To clean the panels, use a soft, damp
cloth.

Cleaning the Delivery Unit
and Milk Foamer:

The MASTER/COFFEE version is already
equipped to wash the delivery unit. To carry
out the washing cycle function, proceed as
follows:

press the 

WASHING CYCLE key or

press the arrow key 

followed by the

E N T E R key and the machine will begin a
wash cycle that consists of hot water delive-

ries alternated with pauses. The whole cycle
lasts approximately 4 minutes.
We recommend that you carry out a
GROUP WASHING CYCLE at least once a
day in order to keep the delivery point
clean.
Group washing should be carried out at
least ONCE A WEEK, using the proper
tablets of detergent.

CAUTION: RISK OF INTO X I C AT I O N .

We remind you not to interrupt a washing
cycle using detergent tablets once started,
otherwise detergent residues may remain
inside the machine.
Proceed as follows: 
- Insert the tablet of detergent into the door

situated alongside the bell-jar of coff e e
beans on the top cup storage surface
(Fig.1, no.11).

- Press the WASHING CYCLE key or the

arrow key 

, followed by the ENTER key:

the machine will automatically start its
wash cycle.
Repeat the washing operation, this time
without inserting the detergent tablet, in
order to eliminate any detergent resi-
dues completely.

- The Master Cappuccino Version is equipped

to wash the milk foamer, delivery group and
the tube which takes the milk from the inside
of the cooler.  To carry out a complete
washing cycle, proceed as follows: 
Remove the milk suction tube from the
container and position it in another contai-
ner along with the proper detergent solu-
tion. Insert the U-key for programming, and

press the arrow key 

once, followed by

the  E N T E R k e y. The display will read
“COMPLETE WASH” and, when ENTER is
pressed, the machine will begin to suck up
detergent to clean the tubes and the milk
f o a m e r. At the same time, the delivery
group wash cycle will begin. When the suc-
tion and detergent wash cycle have fini-
shed, repeat the washing operation, this
time replacing the detergent with hot water,
in order to eliminate any possible residues
from the tubes. We recommend that you
to carry out this washing operation at
the end of every day and in any case,
every time that you switch off the
machine for any period of time.
The group washing cycle should be car-
ried out using the proper detergent
tablets at least once a week.

CAUTION: RISK OF INTO X I C AT I O N .

We remind you not to interrupt a washing
cycle using detergent tablets once started.
Proceed as follows: 
- Insert the tablet of detergent into the door

situated alongside the bell-jar of coff e e
beans on the top cup storage surface
(Fig.1, no.11).

- Carry out the complete washing cycle as

described above.

- Repeat the washing operation, this time

without inserting the detergent tablet, in
order to eliminate any detergent residues
completely.

CLEANING AND MAINTENANCE

Содержание CUP WARMER

















Отзывы: